TENon® – KSEN Low-Temperature Heating Cable

Design:

1. Copper tinned or nickel-clad conductors of 2х1.2 mm² cross-section. *
2. Semi-conducting self-regulating matrix.
3. Insulation with properties corresponding to the outer sheath.
4. Braid of copper tinned wires.
5. Sheath of thermoplastic elastomer (t), PTFE (f). **

* another conductor cross-section is allowed (≥ 1.2 mm²)

** manufacture of cable with other sheaths is allowed

Field of Use:

Protection against freezing of pipes, tanks and vessels which are not subjected to steam treatment.

Technical Characteristics:

Features:

• Specific released power at a cable section depends on the ambient temperature.
• The cable can be cut to any necessary length on site.
• The cable can be installed at negative ambient temperatures.
• It is possible to use it in safe and explosion hazard zones of Classes 1 and 2 according to GOST 30852.13.
• PTFE sheath is resistant to the effects of chemical aggressive environments, as well as to climatic effects, including negative temperatures down to - 60°С.

Ordering Information:

TENon-KSENt-10 W/m Т6 0.22 kV TU 16.K180-080-2019

Cable type: KSEN

Sheath material: t – thermoplastic elastomer

Linear heat generation rate: 10 W/m

TENon^® – KSEN Power Characteristics

Maximum Cable Length (m) When Using C-Type Automatic Circuit Breaker